Rubber Magnet: Examples of Magnets Produced According to Use

1. Micromotor

Workable dimensions:: length 40 - 300 mm / width 2 - 30 mm / thickness 0.8 - 6.7 mm; *There are limits according to the balance between length, width and thickness dimensions.
Magnetization specification:: Non-magnetized

Workable dimensions:: length 0.5 - 10 mm / width 0.5 - 10 mm / thickness 0.3 - 6 mm; *There are limits according to the balance between each dimension.
Magnetization specification:: Vertical 1P magnetized
Non-magnetized
Others:: Pole marking with paint is available.

Workable dimensions:: length 10 - 300 mm / width 1.5 - 30 mm / thickness 0.5 - 6 mm; *There are limits according to the balance between each dimension.
Magnetization specification:: Vertical 1P magnetized
One surface, multi-pole magnetization: 4 mm or 7 mm magnetization pitch
Non-magnetized
Others:: Double-sided tape attachment is available.
Heat fusion of polypropylene (PP) protective film on the surface is available.

Workable dimensions:: length up to 25 m / width 10 - 50 mm / thickness 0.5 - 2 mm; *Wound onto a corrugated cardboard tube
*There are limits according to the balance between length, width and thickness dimensions.
Magnetization specification:: Vertical 1P magnetized
Non-magnetized
Others:: Double-sided tape attachment is available.
Heat fusion of polypropylene (PET) protective film on the surface is available.

Workable dimensions:: length 10 - 1,000 mm / width 10 - 300 mm / thickness 0.5 - 6 mm; *There are limits according to the balance between length, width and thickness dimensions.
Magnetization specification:: Vertical 1P magnetized
*Up to 250 mm width for lengths of 300 mm or less, and up to 50 mm width for lengths exceeding 300 mm are available.
One surface, multi-pole magnetization: 4 mm or 7 mm magnetization pitch
Others:: Double-sided tape attachment is available.
Heat fusion of polypropylene (PET) protective film on the surface is available.